1.First, take out the spare wheel.

2.

With the word screwdriver remove the decorative cover, suggestions can wipe the dirty places by the way.

Don't put the jack, first loosen the screws, remember, is a little loose, because the original screw is tight, with feet to get moving, if the jack will put bad under the shelf, and for the sake of safety, in accordance with the following order screw:

13

42

In fact, it means "diagonal".

3.The screws are tight. To use the foot to loosen the strength.

4.Jack up, and then all the 4 screws removed, remember to put the screw, so as not to find it later.

5.After lifting the jack, continue to loosen the screws and remove the screws

If the surface is uneven, may hurt jack, so you can find the appropriate items as cushions, now find a skin when the rubber mat.

6.You can screw on the new tire

7.The first four screws tighten by hand, and then put down Jack, and tighten the screw, but do not wring is dead, or turn the screw broken, first off jack is because back to use tools to tighten the screws, but also with the foot, afraid of hurting the frame.

8.Finally, with the decorative cover, the tyre changes were completed.