In the vehicle factory assembly, will do the dynamic balance test, is to make the wheel more stable at high speed. What is the dynamic balance? What should I do?

The wheels of a car are made of tires and wheels as a whole. But because of manufacturing reasons, so that the overall distribution of the various parts of the quality can not be very uniform. When the car wheel high-speed rotation, it will form a dynamic imbalance, causing the vehicle in the running wheel jitter, steering wheel vibration phenomenon. In order to avoid this phenomenon or to eliminate this phenomenon has occurred, it is necessary to make the wheels in the dynamic situation by increasing the weight of the method, so that the wheel to adjust the balance of the edge. The process of correction is that people often say that the dynamic balance.

owners will find the wheels on the wheels of the wheel edge, there are one or more pieces of different sizes of small lead. Some of these small lead pieces will be attached to the inside of the hub, and some will be stuck in the outer side of the hub. Compared with all kinds of beautiful wheels, these small lead seems to be some less phase contrast. But it is this little lead block, the stability of the high-speed car plays a very important role.

Steps to do the balance:

There are four steps to make a dynamic balance: first remove the LOGO, put the wheel on the balance, choose the size of the fixed device. First pull the ruler on the balance, measure, and then enter the first controller

 The second step is to take the bend out, measure the rim width, and also on the second controller

 The third step is to enter the rim diameter at the controller and press STRAR to start

When the test stops, the computer will measure the inside and outside the rim need to increase the weight of the weight, first installed outside, turn the tire, according to the prompts to hit the weight.

Tires should be done regularly to check the balance, with a dynamic balance detector inspection. Tire balance is divided into two kinds of dynamic balance and static balance. Dynamic imbalance will make the wheels swing, so that tires wear wave wear; static imbalance will produce bumps and beating phenomenon, often the tire flat phenomenon. Therefore, the regular detection of balance can not only extend the tire life, but also improve the stability of the car when driving, to avoid high-speed driving due to tire swing, beating, loss of control caused by traffic accidents.