Tire

Tire replacement cycle with the brake pads are more similar, that is, different driving habits and different road conditions, tire wear difference will be very large, some violent elements play with tires, what else to say, rich and self-willed us Can not manage it either. However, the tire is also wear-resistant, and each tire will have many signs of wear limit, are located in the tire longitudinal drains. As shown above the finger refers to the place where the tire is the ultimate wear mark, usually 1.6mm thick, that is to say when the tread wear to flush with this mark, it means that the tire needs to be replaced, it is so simple and crude

Brake pads, brake discs

Brake pads and brake disc replacement cycle and everyone's driving habits and car environment (road conditions) are closely related, there is no fixed standard, in general, a brake pads with more than 40,000 kilometers is no problem, and some models are equipped with a warning tone Or warnings, which is more convenient. But not equipped do not need to worry about, when the friction material on the brake pad to the steel back warning line (each maintenance can allow technicians to check), to replace the brake pads; brake disc, in general, replace the brake 2 times The best piece of brake disc replacement, brake disc wear limit is generally 2mm.

3. Oil, machine filter

Machine oil, machine filter can be said that the maintenance of the most basic but also the most important two, each maintenance must be replaced

Ⅰ. Mineral oil: Do not tangle, come strictly in accordance with the manufacturer's instructions, be obedient Oh.

Semi-synthetic motor oil: every 7500-10000 km, no more than 8 months.

Ⅲ. Fully synthetic engine oil: every 10,000-15000 km, no more than 1 year.

4. Air filter, air filter

Air filter relates to the engine breathing is smooth, air conditioning filter related to the quality of the air inside the car, these two are more important,

3. Glass of water, antifreeze, air conditioning refrigerant

Glass of water is actually related to the safety of things, there is no need to add in time. If the temperature is above 0 degrees Celsius, there is no problem adding natural water directly; however, if the temperature is below 0 degrees Celsius, especially in the north, be sure to add antifreeze that can resist the local world, that is, the freezing point should be lower than the local air temperature, Otherwise, the glass of water froze, easy to crack the kettle.

Air conditioning refrigerant: air conditioning and cooling felt bad, if after checking because of the lack of air conditioning refrigerant reasons, you can add according to the amount.