Product Description

Product function:

after the measurement data of the four-wheel aligner is determined, for example, the camber angle measured by
the aligner is greater than the specified value by minus 1 degree. At this time, you need to remove the positioning fixture,remove the tire and replace the required four-wheel alignment parts. At this time, you need the magnetic leveling instrument produced by us. In the past, operators used their own experience to operate when adjusting the inclination, and sometimes there were errors.
Using the level produced by us, they can accurately adjust to the required measurement angle.

Specification:
1.Measures the Camber and Caster angle on the wheel hub or brake disc.
2.Suitable for accurate checking of the castor and camber angle.
3.Has a simple leveling adjustment from -5 degrees to 5 degrees.
4.Magnetic gauge attaches to the hub or disc brake.
5.Allows adjustment to maintain correct wheel alignment and even tyre wear.
6.Time and money saving device.
7.Easy to read and convenient to operate.8.Use this simple level to restore a vehicle's camber setting after strut repair or
installation.

Specifications:
Color: as shown
Length: about 1500mm
Bubble number: 5
Material: plastic
Height: 13cm
Size: about 12.7×5cm/5×1.97 (L*D)
Measurement range: 1.5mm
Measurement accuracy: 99

Instructions:
1. Remove the four-wheel alignment sensor (fixture) and tire;
2. Carefully suck the magnetic level on the side of the brake disc;
3. Adjust the level to zero;
4. Install the required positioning parts;
5. Use tools to adjust the positioning parts to the required measurement angle with the help of the degree indication of the
magnetic level.
6. Re measure with the locator. If there is a little deviation, just fine tune it under the vehicle. (generally, a little
deviation will not cause positioning failure).

Use Environment

Packing & Delivery

Company Profile

Customers Feedback

FAQ

1. Who are we?

We are based in Hebei, China, in 2014，focusing on the production sales and research and development of automobile
related products such as wheel balance block and tire repair rubber strip. After years of development the company began to take the rules, the introduction of a fully automatic cold rolling molding equipment.Independent research and development into repair rubber strip production line.

2.Why choose us?

1)We are a more than 10 years professional manufacturer in car accessories with
high quality and competitive price;

2)Always a pre-production sample before mass production;

3)Always final Inspection before shipment

3.What can you buy from us?

wheel balance weight,repair rubber strip, tire seals, tire valve, car jack and so on.
4.What's your auto fastener guarantee?

Strictly complying with quality management systems of ISO 9001 and SGS. If you have any problems concerning quality, we will offer you a refund or a replacement.

5.How many quantities about packing for each item?
Without quantity limitation for inventory goods; more than 2000 pcs/item for customization order.

6. How long is the date of  delivery?

lf inventory goods, we will delivery within 2 working days.For a customized order,within 30-60 days.

Contact Us

MANUFACTURE · PROFESSION · SAVE

To get the last price, email us: info@yqyautoparts.com

or add whatsapp: +86 153 6977 6669

or leave message in our website.